Cómo reemplazar piedras y mechas en un mechero Zippo

Quick Answer

Replace the flint and wick in your Zippo lighter by disassembling the insert, removing the old parts, and installing new ones. Always use genuine Zippo flints for best performance.

Step-by-Step Replacement Guide

1. Step 1: Remove the Insert: Lift the insert out of the lighter case. If it's snug, use a coin or screwdriver to gently pry it up from the bottom. Checkpoint: Make sure the insert is fully removed before proceeding.
2. Step 2: Access the Flint Tube: Turn the insert upside down and remove the screw at the bottom of the lighter. This releases the flint spring and the flint. Checkpoint: Keep the spring and screw in a safe place; they are easy to lose.
3. Step 3: Remove the Old Flint: Let the old flint fall out. If it's stuck, use a small tool like a paperclip to gently push it out from the top. Checkpoint: Do not force it; you could damage the flint tube.
4. Step 4: Insert the New Flint: Drop a new flint into the tube, then replace the spring and screw. Tighten the screw until it's snug, but don't overtighten. Checkpoint: If the spark is weak, the flint may be upside down; make sure it's seated properly.
5. Step 5: Replace the Wick: Pull the old wick out from the top of the insert. Thread the new wick through the same hole, leaving about 1/8 inch protruding above the chimney. Checkpoint: Ensure the wick is not too long; trim if necessary.
6. Step 6: Reassemble and Test: Slide the insert back into the case, fill with lighter fluid, and test the spark. If the flame is uneven, adjust the wick position. Checkpoint: Always wait a few minutes after filling before lighting to allow the fluid to saturate the wick.

Recommended Replacement Parts

• Zippo Lighter Maintenance - Replacement Flints 6 Pack: Zippo lighter flints fit all Zippo lighters and are slightly softer than most brands, reducing wear on the flint wheel and your fingers. Using genuine Zippo flints ensures a reliable spark and extends the life of your lighter's ignition mechanism.

  

• Star Lighter Flints & Wick Replacement Set: The Star Lighter Flints & Wick Replacement Set is designed for use in Star Brand and Zippo petrol lighters. This set provides both flints and a wick, so you have everything needed for a complete maintenance session.