How to Use a Boveda Humidity Pack in Your Cigar Humidor
By Smoke-King Tobacconist | Published: 2026-10-27
Category: How-to Guides
Learn how to set up a Boveda humidity pack in your cigar humidor for consistent humidity control. Step-by-step guide with tips for Boveda 62% and 58% packs.
Quick answer
Place a Boveda humidity pack inside your cigar humidor and let it work passively. No soaking, no misting—just add the pack and close the lid.
Why choose a Boveda pack over traditional humidifiers
Boveda packs are self-regulating two-way humidity control systems. Unlike sponges or gel beads, they both add and absorb moisture to maintain a precise relative humidity (RH) level. This means you don't need to monitor or adjust them—just replace when stiff.
Which Boveda percentage should you use?
Boveda offers different RH levels for different storage needs. The 62% pack is ideal for aging cigars in a sealed humidor, as it preserves the oils and flavor profile. The 58% pack works better for loose tobacco, pipe tobacco, and roll-your-own blends, keeping them from drying out or becoming too damp. Choose based on what you store most.
Step-by-step guide to using a Boveda humidity pack
- Check your humidor seal: Make sure your humidor lid closes tightly and the seal is intact. A leaky humidor will cause the Boveda pack to work harder and deplete faster. A common mistake is using a Boveda pack in a poorly sealed humidor—test with a dollar bill or flashlight first.
- Choose the right Boveda pack for your contents: Select the Boveda 62% pack for cigar aging or the Boveda 58% pack for loose tobacco, pipe tobacco, or herbs. The pack will maintain that exact RH level. Using the wrong percentage can over-dry or over-humidify your stash—match the pack to what you store.
- Place the pack inside the humidor: Remove the Boveda pack from its sealed wrapper and place it directly on top of your cigars or tobacco, or in an empty space. Do not cut or puncture the pack. A common mistake is leaving the pack in its wrapper—it must be exposed to the air inside the humidor to work.
- Close the lid and wait 24–48 hours: Allow the Boveda pack to stabilize the humidity. The pack will feel soft and pliable when active. Check with a hygrometer if you want to verify the RH level. Do not open the humidor repeatedly during this period—it slows down the stabilization process.
- Replace the pack when it becomes stiff: After about three months (or sooner if the humidor is opened often), the pack will harden as it loses moisture. Remove it and replace with a fresh one. A common mistake is trying to recharge a stiff Boveda pack—it cannot be revived and must be replaced.
Product facts
- Boveda 62% - 67g Humidity Pack for Cigars & Loose Tobacco: The Boveda 62% 67g pack is designed for aging cigars, maintaining a consistent 62% RH for up to three months once opened. This gives you a set-and-forget solution for long-term cigar storage without daily monitoring.
Boveda 62% - 67g Humidity Pack for Cigars & Loose Tobacco - Boveda 58% - 67g Humidity Pack for Cigars & Loose Tobacco: The Boveda 58% 67g pack is formulated for roll-your-own tobacco, pipe tobacco, and herbs, and lasts at least three months. It prevents loose tobacco from becoming brittle or overly moist, ensuring a smooth smoke every time.
Boveda 58% - 67g Humidity Pack for Cigars & Loose Tobacco
